Gastrodomus PMA25, Руководство по эксплуатации и техническому обслуживанию

Страница: 27 / 58

26
The moving parts have to be disassembled
as follows:
• Mixer: make sure the external shovel is in
A
the upper vertical position ( Fig. 13A )
(only this position allows the disassem-
bling of the piece).
For model PMA25: remove the mixer,
pull out the knob ( Fig. 13B ) until the
mixer disengages;
for model PMA40: remove the mixer by
unscrewing the external mobile support
until the mixer disengages (
Fig. 13 bis
).
Take the square shaft away from its place
( Fig. 13C ) and at the same time turn the
exter nal end upwards. If you want to
assemble the piece follow these instruc-
tions vice versa. Align the central point
of the shaft with the peg of the moving
support; then, leave the handle.
B
E
F
D
Fig. 13
• Ring nut: ( Fig. 13D ) and drawplate
( Fig. 13E ): unscrew the ring nut by hand,
avoiding pieces falling when the ring nut
comes out of its place, in order to avoid A
causing damage both to people or to the
pieces themselves.
• Archimedean screw: ( Fig. 13F ): after
disassembling the ring nut and the draw-
plate, the Archimedean screw can easily
be taken off from the machine by pushing
its spiral from the internal end.
6.1 COVER AND BOWL CLEANING
Eliminate the dough residue and make sure
to thoroughly clean the most remote-access
pieces: connections of the Archimedean
screw and mixer movements (
Fig 14
), extru-
sion sleeve, cover and pool internal parts.
Use some warm water in order to eliminate
the residual product and then rinse; dry the
surfaces with the help of blotting paper.
WARNING:
Never use non-nutritional,
abrasive or corrosive chemicals to
clean. Also never use coarse or abrasi-
ve objects such as steel wool, abrasive
sponges and so on.
To clean machine inter nal and exter nal
parts:
Fig. 13 bis
Fig. 14
A
Fig. 15