Gastrodomus PMA25, Руководство по эксплуатации и техническому обслуживанию

Страница: 26 / 58

25
After mating the plug to the mains socket,
the machine is ready for use.
First, however, check out proper operation
of all moving parts and components of the
machine.
5.1 CONTROL OF THE INSTALLATION
NOTE: Every drive is voluntarily run by
the start button, when the bowl
cover is closed (Fig. 12F ).
A
Fig. 9
50
cm
Verify that:
• In the “0” position ( Fig. 11C ) all the ele-
ments of the machine have to stop; for
model PMA40, in the “drawplate position”
( Fig. 11D ) the mixer rotates in a clockwise
direction and the Archimedean screw must
rotate in the same direction (check through
the slots in the lid); for model PMA25, on
the other hand, in the “drawplate
position” ( Fig. 11D ) the mixer rotates in a
counter-clockwise direction and the
Archimedean screw must rotate in the
opposite direction;
70÷80
cm
Fig. 10
70÷80
cm
in the “knead” position ( Fig. 11A
A
) the
parts must rotate in the opposite direction.
If the machine or some of its parts fail,
call your local authorized dealer
for repairs.
C
D
B
E
G
6. CLEANING
Warning: For healthy and
hygienic processing of nutritio-
nal products, be sure to keep
your machine and the surroun-
ding environment clean.
DANGER:
Always cut off power sup-
ply before cleaning.
You have to properly clean all the elements
which are in contact with the product; pro-
tection cover, pool, mixer, Archimedean
screw, drawplate, ring nut, when the pro-
duct is still soft.
Fig. 11 – PMA40 Control Panel
F
Fig. 12