82
83
IMPORTANT -
After activating the timer, the brewing cycle is going to be started
automatically at the programmed starting time. You do not have to do anything
else (see: ‘Using the Timer’). With the timer activated, nevertheless you can start
the brewing cycle at once or de-activate the timer (see: ‘De-Activating the Timer’
and ‘Starting the Brewing Cycle Immediately’).
NOTE
To pour a cup of coffee, you may take out the glass carafe for a short time even
during operation. The drip-stop valve closes the filter basket to avoid dripping of cof-
fee, while the glass carafe is not in place. At the maximum after 15 seconds place
the glass carafe back onto the heating plate to avoid overflow of the filter basket.
CAUTION
– The drip stop valve could get blocked by coffee powder. Thus,
when taking out the glass carafe, while the brewing head is still dripping, ensure that
the drip stop valve closes the outlet of the filter basket completely. Place the glass cara-
fe back onto the heating plate after max. 15 seconds. Otherwise, overflow could
occur and hot coffee could run onto the heating plate and under the appliance.
1. Prepare the appliance for operation as described above: assemble the filter sys-
tem (filter holder, filter basket, filter, and splash shield), fill the bean hopper or
filter, push the filter holder under the brewing head, fill the water tank, place the
empty glass carafe onto the heating plate, enter the desired settings (see: ‘Using
Whole Coffee Beans’ and ‘Preparing the Appliance for Operation’).
2. When timer operation is desired, ensure that the internal clock is set correctly
and adjust the starting time, before activating the timer (see: ‘Using the Timer’).
Alternatively, touch the on/off button to start the brewing cycle immediately. The on/
off button illuminates red during operation.
CANCELLING THE BREWING CYCLE
You can cancel any running function (brewing cycle, keep warm, or timer operation)
any time you like. For this, simply touch the red on/off button. The on/off button is
illuminated white again and the current operation stops immediately.
IMPORTANT -
Please keep in mind that the brewing cycle cannot be continued
after cancelling the brewing cycle. However, you can start a new brewing cycle
immediately. With water still in the water tank, you can de-activate the grinder
via the grinder button, and thereafter start a new brewing cycle. The appliance
re-assumes operation using the remaining water.
POURING SOME COFFEE DURING THE BREWING CYCLE
With the glass carafe correctly placed on the heating plate of the appliance, the
drip-stop valve is kept open and the currently brewed coffee runs into the glass cara-
fe. If you remove the glass carafe, the drip-stop valve is closed and the coffee is kept
within the filter basket. Therefore, you can remove the glass carafe during operation
for a short time (max. 15 seconds) to pour a cup of coffee.
CAUTION
– When removing the glass carafe during the brewing cycle, ensure
that the dripping of coffee is stopped completely to avoid damage. The brewing
cycle is not interrupted, when removing the glass carafe. Hot water runs on into the
filter basket. Thus, it is essential to place the glass carafe back onto the heating plate
of the appliance in time to avoid overflow. Ensure that the glass carafe is placed
correctly on the heating plate and the drip-stop valve is opened via the carafe lid.
AFTER THE BREWING CYCLE
As soon as the brewing cycle is complete, an acoustic signal sounds and the keep
warm function is started automatically. The heating plate stays hot for additional 60
minutes (1 hour) and keeps your coffee warm (see: ‘Keep Warm Function and Auto-
matic Shut-Off’).
IMPORTANT -
When switching off the appliance (touching the on/off button), the
keep warm function is cancelled. There is no way to start the keep warm function
without starting a brewing cycle.
3. After the brewing cycle is complete, you may take out the glass carafe for pou-
ring some cups or for good. If the keep warm function is running still (the control
panel is illuminated, the on/off button is red), and you do not wish to use the
heating plate of the appliance any longer, for saving energy touch the on/off
button to cancel the keep warm function.
IMPORTANT -
With the keep warm function running still, do not place the empty
glass carafe onto the heating plate to avoid overheating and to avoid burning-in
residues of coffee.
NOTE
For saving energy, after the keep warm time, the appliance switches off automa-
tically and the on/off button is illuminated white again. With the exception of the
on/off button, the control panel gets dark. If you have cancelled the keep warm
function manually, the automatic shut-off is triggered always after 60 seconds (1
minute; see: ‘Keep Warm Function and Automatic Shut-Off’).
