64
65
TECHNICAL SPECIFICATIONS
Model:
Art.- No.: 42711 Coffee Machine Grind & Brew Pro
Power supply:
220 - 240 V AC, 50 Hz
Power consumption:
900 W
Length of power cord:
approx. 100 cm
Weight:
approx. 4.5 kg
Dimensions (without Glass Carafe):
213 x 314 x 430 mm (W x D x H)
Capacity of the water tank:
approx. 0.3 bis 1.5 Liter (2 - 12 Cups)
Capacity of the bean hopper:
approx. 200 g whole coffee beans
Capacity of the filter basket:
max. 60 g Coffee powder
Certification:
https://www.tuev-sued.de/ps-zert
These specifications may change without notice.
PROPERTIES OF YOUR NEW COFFEE MACHINE GRIND
& BREW PRO
You may use pre-ground coffee powder as well as whole coffee beans for new
COFFEE MACHINE GRIND & BREW PRO. Additionally, you may use the provided
re-usable filter or your preferred filter bags. The re-usable filter must be cleaned after
each use. Thereafter, you may use it again.
Via the amount of water filled into the water tank, you control the amount of coffee
you will get. The appliance will empty the water tank with every brewing cycle. The
settings at the operating elements do NOT influence the actually brewed amount of
coffee (number of cups).
For operation, the filter basket holding the filter and coffee powder is covered via a
splash shield. Therefore, the water will not splash at the brewing head, but can only
drip into the centre of the filter. Additionally, when using paper filter bags, during
grinding and brewing the filter bag can not collapse or block the outlet of the grin-
der or brewing head.
ACOUSTIC SIGNALS, BUTTONS, AND DISPLAYED VALUES
The control panel is designed as a touchscreen and operated similar to the display
of smart phones: you simply need to touch the displayed buttons for using the assi-
gned function. Therefore, the control panel is a smooth surface that can effortlessly
be cleaned hygienically.
IMPORTANT -
When the appliance reacts only unwillingly to your touch, the skin
of your fingers may be too dry or fatty. Moisten your finger a little and try again
(see: ‘Solving Problems’).
Acoustic Signals
• The appliance responds to each successful input at the control panel with a beep.
• When operated via the timer, reaching the set starting time and starting the
brewing cycle is accompanied by an acoustic signal.
• A signal sounds as soon as a brewing cycle is complete and the coffee is ready
for consumption. Automatically, the appliance switches to the keep warm func-
tion (see: ‘Keep Warm Function and Automatic Shut-Off’).
• After the maximum keep warm time (approx. 1 hour) expired, the appliance
shuts off completely, and all buttons go out except for the on/off button. This
activity is accompanied with an acoustic signal, too.
The Functions of the Buttons
Button
Function
Possible Values
Timer
Controlling the timer function (see: ‘Internal Timer’).
– a short touch activates or deactivates timer operation.
– holding your finger for some seconds on the button switches to showing or setting the
starting time of the timer. With the timer activated, the starting time will be shown only.
While the timer is de-activated, the starting time flashes and can be adjusted.
on, off, setting or
displaying the starting
time
Cups
Setting the number of cups to be brewed. Usually, this value should correspond to
the amount of water you filled into the water tank. However, in combination with
the strength button, you can adjust the strength of your coffee via this setting.
2, 4, 6, 8, 10, 12
Grinder
Switching the grinder off or on.
IMPORTANT: Do not forget to switch off the grinder via this button, after filling the
filter with pre-ground coffee powder! The grinder is de-activated, when the button is
illuminated red.
off, on
Strength
Controlling the amount of coffee powder the grinder will give off just before the
brewing cycle. This button is only affective, when using the grinder (grinder button is
illuminated white).
strong, medium, weak
On/Off
With the control panel dark: switching on the appliance.
With the control panel on and this button illuminated white: starting the brewing cycle.
With this button illuminated red: cancelling any running function.
IMPORTANT: You cannot switch off the touchscreen. This is done via the automatic shut-
off (see: ‘Keeping Warm and Automatic Shut-off’).
on,
start,
cancel
