60
61
the drip-stop valve. Thus, always ensure that the coffee will stop run-
ning, when taking out the glass carafe. If the brewing cycle is still run-
ning, after 15 seconds at the maximum place the glass carafe back
onto the heating plate with the lid closed correctly to avoid overflow.
• Always switch OFF (press the on/off button, all buttons are illumina-
ted in white) then unplug the appliance, and leave the appliance cool
down, before moving, or cleaning the appliance, or when the appli-
ance is not in use for an elongated time period. Always hold the hou-
sing of the appliance at both sides for moving the appliance.
Do not
hold the appliance at the brewing head, water tank, filter holder,
bean hopper, or power cord for moving the appliance.
• Keep the appliance and its parts and accessories clean. Clean the
appliance according to the instructions in chapter ‘Care and Clea-
ning’. Do not use any abrasive cleaners, cleaning pads (e.g. metal
scouring pads), or any corrosive cleaners (e.g. disinfectants, unsuited
descaling agents, chemical bleach) for cleaning. Do not use any hard
or sharp-edged objects with the appliance.
•
Do not place the appliance in an automatic dishwasher.
IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES
The appliance is driven electrically. Place the appliance near a suitable wall
power outlet to connect the appliance directly to a protected mains power
supply with protective conductor (earth/ground) connected properly. Ensure
that the voltage rating of your mains power supply corresponds to the voltage
requirements of the appliance (220 - 240 V, 50 Hz, AC, rated for at least 8 A).
The installation of a residual current operated circuit breaker (r.c.c.d.)
with a maximum rated residual operating current of 30 mA in the supp-
lying electrical circuit is strongly recommended. If in doubt, contact your
electrician for further information.
In various foreign countries, the specifications for power supplies are sub-
ject to incompatible norms. Therefore it is possible that power supplies
in foreign countries do not meet the requirements for safe operation of
the appliance. Before operating the appliance abroad, ensure that safe
operation is possible.
• Do not use any desk top multi socket outlet, external switching device,
extension cords, or remote control systems to avoid risk of overhea-
ting, fire, or electric shock. Always handle the power cord with care.
Always completely unwind the power cord before use. Power cords
may never be knotted, twisted, pulled, strained or squeezed. Do not
place the appliance on a power cord. Keep the power cord away
from any hot surfaces (e.g. range, heater, or oven) or sharp edges.
Do not let the power cord hang over the edge of the table or coun-
ter. Ensure that nobody will pull the appliance by the power cord. To
unplug the appliance, always grasp the power plug. Do not attempt
to repair the power cord!
• Do not pour or spill any liquids on or under the appliance or power
cord. Do not immerse the appliance, power cord, or power plug in
water or other liquids. Do not place the appliance on wet surfaces.
When liquids overflowed or are spilled on the base or power cord or
accumulate under the appliance, immediately unplug the appliance.
Thereafter, dry the appliance and let it dry naturally for at least 1 day.
HIGH TEMPERATURES - RISK OF BURNS
Your new
COFFEE MACHINE GRIND & BREW PRO
is designed for brewing
coffee. Thus, some parts (e.g. brewing head, filter holder, filter basket,
glass carafe, carafe lid, and heating plate) will get very hot during ope-
ration and hot steam and water could escape. Please adhere to the fol-
lowing precautions to avoid injuries and damage.
• During operation and some minutes thereafter, do not hold your
hands, arms, or any delicate objects under or near the brewing head,
filter holder, filter basket, or drip stop valve. Only touch hot parts at
the dedicated handles during operation and shortly thereafter to avo-
id scalds. Even after operation some parts may be still hot. Shortly
after operation, do not place the glass carafe or filter basket on sur-
faces sensitive to moisture and heat or on very cold surfaces. Do not
place any heat-sensitive objects on the heating plate.
• Do not press the opening button (“OPEN”) and swivel out the filter
holder from under the brewing head during operation to avoid risk of
burns due to hot water and steam.