84
85
1. At first, switch to the Advanced Features.
See above: ›Advanced Settings‹.
2. Rotate the SELECT dial, until “Lcd” is
shown on the LCD display.
3. Press the SELECT dial.
4. Rotate the SELECT dial to the desired
brightness of the LCD displays.
5. Press the SELECT dial to set. The Espresso
Machine will beep once to confirm your
selection and switch to standby mode.
Spotlights (SPOt)
Adjust the brightness of the LEDs lighting the
drip tray area.
1. At first, switch to the Advanced Features.
See above: ›Advanced Settings‹.
2. Rotate the SELECT dial, until “SPOt” is
shown on the LCD display.
3. Press the SELECT dial.
4. Rotate the SELECT dial to the desired
brightness.
5. Press the SELECT dial to set. The Espresso
Machine will beep once to confirm your
selection and switch to standby mode.
Steam Temperature (StEA)
Adjust the steam boiler temperature, which
in turn controls steam pressure. The default
is: 130 °C.
1. At first, switch to the Advanced Features.
See above: ›Advanced Settings‹.
2. Rotate the SELECT dial, until “StEA” is
shown on the LCD display.
3. Press the SELECT dial.
4. Rotate the SELECT dial to the desired tem-
perature.
5. Press the SELECT dial to set. The Espresso
Machine will beep once to confirm your
selection and switch to standby mode.
Air Pump Delay (Air)
Note:
This function is for experienced users only.
This function is used to delay the operation of
the air pump during automatic milk texturing.
The default is: 02 seconds.
1. At first, switch to the Advanced Features.
See above: ›Advanced Settings‹.
2. Rotate the SELECT dial, until “Air” is
shown on the LCD display.
3. Press the SELECT dial.
4. Rotate the SELECT dial to the desired
delay time.
5. Press the SELECT dial to set. The default
temperature for turning off the air pump
will be displayed.
6. Rotate the SELECT dial to the desired tem-
perature.
7. Press the SELECT dial to set. The Espresso
Machine will beep once to confirm your
selection and switch to standby mode.
To Select the Volume for Acoustic
Signals (Snd)
Use this function to adjust the audible signals.
Select between off (OFF), low (Lo) or high
(Hi).
1. At first, switch to the Advanced Features.
See above: ›Advanced Settings‹.
2. Rotate the SELECT dial, until “Snd” is
shown on the LCD display.
3. Press the SELECT dial.
4. Rotate the SELECT dial to the desired set-
ting.
5. Press the SELECT dial to set. Depending
on the selected setting, the Espresso
Machine may beep once to confirm your
selection. Thereafter, the Espresso Machi-
ne switches to standby mode.