32
directly near the appliance during operation. Beware of steam and
condensate, when removing the cover and the food trays. After ope-
ration, do not place the food tray and/or cover on any heat-sensitive
or moisture-sensitive surfaces.
• Do not place any hard and/or heavy objects on or in the appliance
or any part of it. The food trays are not suitable for any too heavy
pieces of food.
• Always switch OFF the appliance (holding the On/Off button pressed
until the LCD display gets dark), unplug, and wait for the appliance
to cool down completely, before cleaning the appliance and when
the appliance is not in use. Do not use any hard, sharp-edged, or
abrasive objects with the appliance (e.g. knives, scrapers). Do not
use any abrasive cleaners, cleaning pads (e.g. metal scouring pads),
or any corrosive chemicals (e.g. bleach) for cleaning.
Do not place
the heating base or power cord of the appliance in water or in an
automatic dishwasher!
IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES
The appliance is heated electrically. Place the appliance near a suitable
wall power outlet to connect the appliance to a protected mains power
supply with protective conductor (earth/ground) connected properly.
Ensure that the ratings of your mains power supply correspond to the
requirements of the appliance (220 - 240 V AC, 50/60 Hz, 8 A).
• The installation of a residual current operated circuit breaker (r.c.c.b.)
with a maximum rated residual operating current of 30 mA in the sup-
plying electrical circuit is strongly recommended. If in doubt, contact
your electrician for further information.
• In various foreign countries, the specifications for power supplies are
subject to incompatible norms. Therefore it is possible that power sup-
plies in foreign countries do not meet the requirements for safe opera-
tion of the appliance. Thus, before operating the appliance abroad,
ensure that safe operation is possible.
• Do not use any desk top multi socket outlet, external timer, remote
control systems, or extension cord. The power outlet must always be
