background image

19

BEDIENUNGSANLEITUNG

MILCHAUFSCHÄUMER

Lesen Sie diese Anleitung sorgfältig, bevor Sie das Gerät verwenden 

und bewahren Sie sie auf

KLAMER Black Series

Milk Frother Pro

Hilfe und Tipps auf

capu.klamer-kitchen.com 

oder QR-Code Scannen

Warranty

The manufacturer provides warranty in accordance with the legislation of the  

customer's  own  country  of  residence, with a minimum of 12 months, starting 

from the date on which the appliance is sold to the end user.
The warranty only covers defects in material or workmanship, which will not 

apply in cases of:
- Normal wear and tear
- Incorrect use, e.g. overloading of the appliance, use of non-approved 

accessories

- Use of force, damage caused by external influences
- Damage caused by non-observance of the user manual, e.g. connectionto an 

unsuitable mains supply or non-compliance with the installation 

instructions 

- Partially or completely dismantled appliances.

If the icon below (crossed-out trashcan on wheels) is found on the product, the 
European directuve 2002/96/EG applies. These products may not be disposed of in 
the household waste at the end of its useful life. Disposal can take place at 
appropriate collection points provided in your country.

This product is in accordance with the 
following European directives: 

2014/30/EU (EMV) 
2014/35/EU (Niederspannung) 
2011/65/EG (RoHS)

Declaration of Conformity

Disposal Information

Summary of Contents for Milk Frother Pro Black Series











Reviews: