42
in steps of 30 minutes. Press the Start/Stop button
to start the dehydration
cycle.
7. The fan starts operation audibly. On the LCD display, the heating icon
flashes during the complete dehydration cycle. As soon as the actual tempera-
ture within the dehydration chamber reaches the set temperature, the timer starts
counting down the set dehydrating time.
8. Simply wait until the dehydration cycle has finished with the time display rea-
ching “0”, an acoustic signal sounds with the time-out icon flashing on the
LCD display for some seconds. Thereafter, the appliance stops operation auto-
matically and the LCD display is deactivated.
CAUTION
– Before leaving the appliance operate without supervision, always
ensure correct operation
(see: ‘Important Safeguards’)
. Wipe off liquids that dripped
onto the heating base. Check, whether the count-down of the dehydrating time
started to ensure that the appliance will shut-off automatically in time.
NOTE
You can Interrupt or cancel any dehydration cycle at any time you like (see: ‘Pause
Function’). Also, use this pause function, if you wish to change the set temperature,
check the consistency of your food, or change the sequence of food trays on the
heating base, while a dehydration cycle is running.
IMPORTANT -
Being aware of steam and condensate, when removing the food trays.
The food trays of the appliance and your food may be a little hot.
9. With your food dried sufficiently, grasp the complete dehydration chamber (food
trays and cover) by the handles at both sides and lift the dehydration chamber
from the heating base. Then remove your food. Place your food in a sterilized
container or bag. If possible, evacuate the container or bag. Store your food in
the refrigerator (see: ‘Tips for Best Results’).
NOTE
Do not move the appliance with the food trays mounted on the heating base.
Otherwise the food trays may fall. Take the food trays off the appliance before
moving the heating base. You may fill the food trays with another portion of food
immediately and start a new dehydration cycle. In this case, switch on the appli-
ance again with the default settings (50°C, 6:00 hours) by shortly pressing the
On/Off button. Thereafter, select the appropriate temperature and dehydrating
time as described above.
