DX4040 INSTRUCTION AND OPERATING MANUAL (E2.04)
the battery is below 10 %. Reconnect the AC/DC PSU in order to recharge
battery.
–
DX4040 can be switch off on two different ways from Calcmet Lite via Bluetooth.
o
Go to File → Exit (Figure 25). Calcmet Lite software and analyser will
switch off (if Bluetooth connection is still valid).
o
Click on the top right end corner cross. Calcmet Lite software and
analyser will switch off (if Bluetooth connection is still valid).
Figure 25.
Switch off the analyser.
6.4.12 Transferring of Spectrum/Results Files
After synchronization of the PDA/computer, saved files can be accessed and
transferred using Microsoft Explorer. It is strongly advised to synchronize only files. Do
not start to synchronize calendar or contacts. Pay attention to limit the number of files
saved onto PDA memory as the access time gets very long if many files are stored onto
PDA memory.
6.4.13 Application Selection
Applications can be selected from File → Select Application (Figure 26). The user
needs to specify the path where the application is located (normally under “Storage
Card”) and the application file (*.LIB file). Click onto “Open file” in order to load the
application.
Figure 26.
Application selection.
60
