GAS GAS EC250E 2012, Руководство пользователя

Страница: 33 / 81

Owner’s manual
-33-
Daily inspection
Are the brake pads correct? We can visually check the thickness of the lining (1)
that remains, we know if are in func ti on or we must change quickly, the thickness
of the lining must be 1 mm as a minimum.
Does the controls have good touch? Front brake lever, rear brake pedal, clutch
lever, gearbox pedal, starter lever, lights switches, engine stop switch, horn and
lighters switches, gas command, kick starter. All commands have its opera ti on and
characteris ti c touch, a change indicates an abnormality or damage. You know your
motorcycle, any change that you appreciate will make you immediately go to your
GAS GAS o ffi cial service. Your GAS GAS o ffi cial service will be happy to assist you
and ensure your safety.
Does the side stand have a correct touch and func ti on? This is a part of motor-
cycles that o ft en cause problems, including safety problems. Because it is a part
of your motorcycle with have a severe work. If you perceive a strange touch or
di ffi culty in its retreat, you must clean the lateral stand, its axel and springs, and
verify the ti ghtening of its bolt. If it con ti nues with the incorrect func ti on, go to
your GAS GAS o ffi cial service immediately, for your safety.
Always check the ti res air pressure. If you have pressure problems, go to your
GAS GAS o ffi cial service.
1