GAS GAS EC250E 2012, Руководство пользователя

Страница: 30 / 81

Owner’s manual
-30-
It is important to respect the break-in procedure, with this you will ensure the
dura ti on and correct func ti on of your GAS GAS in the long term. Intervals to res-
pect are as follows:
1. From 0 to 200 Km.: Ride between 50% and 75% of load (thro tt le opening),
alterna ti vely, without con ti nued use of the 75% load.
2. From 200 a 300 Km.: Ride equal but occasionally reaching the 100% load,
without keeping it more than 5~10 seconds.
3. From 300 a 400 Km.: Ride between 75% and 100% of load alterna ti vely,
without keeping the full load.
4. From 400 Km, increase demand with progressivity for about 60~80 Km, to
reach its full performance.
DANGER
An imprudent accelera ti on can cause engine problems. Be careful to use the
skills and techniques necessary when driving the bike.
Starting procedure
To start your GAS GAS you can used the kickstarter or by electric start:
For start by electric start follow this steps:
1. Open the fuel tap.
2. Turn on the key (1).
3. Give the thro tt le two energic strokes.
4. Pull the choke lever (2).
5. Pull the clutch lever.
6. Push the kickstarter vigorously.
Break-in procedure
2
1
To start your GAS GAS follow this steps:
1. Open the fuel tap.
2. Deploy the kickstarter.
3. Give the thro tt le two energic strokes.
4. Pull the choke lever (1).
5. Push the kickstarter vigorously.