GAS GAS EC250E 2012, Руководство пользователя

Страница: 64 / 81

Owner’s manual
-64-
Carburetor setting
1. Find the correc ti on factor to adjust the carburetor.
Example: 1000 m al ti tude and 35°C temperature, the correc ti on factor is
0.94.
2. Using the correc ti on factor, select the main jet.
Example: Factor 0.94, mul ti ply the main jet size by this number.
Main jet = 175 x 0.94 = 165.
3. Find the correc ti on factor for the needle and air screw on the table and
change the clip posi ti on and air screw opening.
Example: Raise clip 1 posi ti on and loosen 1 turn the mixture screw.
WARNING
To make correc ti ons always take as reference the compe ti ti on carbure ti on. Do
not make changes if you are not sure that they are needed. This speci fi ca ti ons are
based on the use of the recommended gasoline and oil.
CORRECTION FACTORS
(For temperature or al ti tude changes).
Needle posi ti on / Mixture screw opening
Correc ti on factor 1,06 o higher 1,06~1,02 1,02~0,98 0,98~0,94 0,94 or lower
Needle posi ti on Lower clip 1 posi ti on Same Same Same Raise clip 1 position
Mixture screw opening Tighten 1 turn Tighten ½ turn Same Loosen ½ turn Loosen 1 turn