charging station using an EV tester or an EV, refer
to
4.12.15 To do a final functionality test of the
. Finalize the installation.
12. Declare installation as completed.
After final testing, the installation of the charging
unit can be declared ready in the GARO Connect
app by clicking
Completed. The charging unit
becomes available to use and visible to the owner.
NOTE
After the installation is complete each charging station
can be activated and deactivated. A deactivated
charging station is indicated as red.
13. Remove the ID label from the charging unit.
14. Functional test
The Wi-Fi credentials on this label can be used to
gain unauthorized access to the charging station.
For this reason, the information should be
considered as sensitive. Place it on a safe space
location, for example on the rear side of the
charging unit.
Perform the necessary functionality tests such as
testing the load management setup to ensure the
current is limited at high load conditions, refer to
4.12.15 To do a final functionality test of the
To install additional charging stations and load
interfaces into a DLM group
If additional units are installed into a DLM system, each
unit must be defined into a group structure. The GARO
Connect app tool controls the workflow order, adding
one unit at a time following the closest relationships.
4C3I36C1023A0
123456
SSID:GaroCU-4C3B6C1023A0
Key: zt55 -u0yk-m63j
Pro
Version: 1.3
79
Содержание ENTITY PRO
