GARO ENTITY PRO, Инструкция по установке и эксплуатации

Страница: 87 / 102

I Red solid light. The charging station is deactivated by the GARO
Connect app or the external enable signal. Example:
A schedule that does not yet enable charging.
J Red slow blinking light, 0.5 Hz. Error in the charging station or the EV. Disconnect the
EV and retry. If the breaker has tripped, a manual
reset is required.
K Red fast blinking light for 3 seconds, 10 Hz. The charging station cannot find authorization for the
EV driver.
L Red and blue slow blinking light, 1 Hz. Software update in progress.
M No light. The charging station has no power or the intensity of
the indication light is reduced.
5.2 TO SCHEDULE CHARGING
1. Open the GARO Connect app on a mobile device.
2. Navigate to Overview.
3. In the view Charging stations click the charging
station to set a schedule.
4. Scheduled charging is indicated by: Red light when
not activated, green light when activated and blue
when both activated and an EV is connected.
5. Click Schedule Charging in the view that opens.
6. Follow the instructions in the GARO Connect app to
set the time for charging.
5.3 TO STOP THE CHARGING OF THE
ELECTRICAL VEHICLE
1. Do one of the procedures that follow to stop the
charging.
a. Follow the instructions for the electrical vehicle,
i.e. the EV will initiate a charging stop.
b. Use a RFID that is connected to same EV driver
that started the charging. Only the EV driver that
started the charging can stop it.
c. Use the GARO Connect app and log in as the
EV driver that started the charging.
2. Disconnect the Type 2 connector from the electrical
vehicle.
CAUTION
The Type 2 connector is locked during charging in the
charging station and the electrical vehicle inlet. Do not
force the Type 2 connector or charging cable as this can
cause damage to the product or the electrical vehicle.
3. If there is a Type 2 outlet in the charging station,
disconnect the Type 2 connector from the Type 2
outlet in the charging station.
4. If there is a fixed cable on the charging station, put
the Type 2 connector in the dedicated parking
position on the charging station.
Version: 1.3 87
Operation