FLIGHT MANUAL STEMME S12
PAGE: 4-30
DOCUMENT NUMBER
REVISION: --
L400-912816 ISSUEFEBRUARY 21 2020
DATE: --- --, -----
Climb:
After the autopilot is engaged it can be used e.g. for automatic controlled
climb. To set the requested parameters perform as follows:
•
Altimeter setting: Set the correct barometric setting using the
correlated knob.
•
Autopilot vertical mode setting: Touch autopilot status box, then
touch VS (refer to: 4.1.5.3 Vertical Mode), Increase reference
vertical speed using the nose up/ nose down button
•
Power and trim setting: Set power and trim as required in
accordance with the announcement of the autopilot.
WARNING
All announcements displayed on the PFD-screen must be accomplished
promptly; otherwise the aircraft may attain flight situations, where the
pilot must immediately take over manually.
CAUTION
Cross-check attitude, altitude and speed regularly using primary flight
instruments!
Descent:
After the autopilot is engaged it can be used e.g. for automatic controlled
descend. To set the requested parameters perform as follows:
•
Altimeter setting:
Set the correct barometric setting using
the correlated knob.
•
AP vertical mode setting: Touch autopilot status box, then touch VS
(refer to: 4.1.5.3 Vertical Mode),
Decrease reference vertical speed using
the nose up/ nose down button
•
Power and trim setting: Set power and trim as required in
accordance with the announcement of
the autopilot.
Содержание G3X Touch
Страница 1: ......
