Garmin G1000:Piper, Руководство пилота

Страница: 404 / 450

Garmin G1000 Pilot’s Guide for Piper PA32
190-00692-00 Rev. B 8-52
ADDITIONAL FEATURES
PRESETS
Up to 15 channels from any category can be assigned a preset number. The preset channels are selected by
pressing the PRESETS and MORE Softkeys. Then the preset channel can be selected directly and added to
the channel list for the Presets category.
Setting a preset channel number:
1)
On the XM Radio Page, while listening to an Active Channel that is wanted for a preset, press the PRESETS
Softkey to access the first five preset channels ( PS1 - PS5 ).
2) Press the
MORE
Softkey to access the next five channels (
PS6 – PS10
), and again to access the last five
channels ( PS11 – PS15 ). Pressing the MORE Softkey repeatedly cycles through the preset channels.
3) Press any one of the ( PS1 - PS15 ) softkeys to assign a number to the active channel.
4) Press the
SET
Softkey on the desired channel number to save the channel as a preset.
Figure 8-60 Accessing and Selecting XM Preset Channels
Press
PRESETS
to
Access the Preset
Channels Softkeys
Press MORE to Cycle
Through the Preset
Channels
Press
SET
to
Save Each
Preset Channel
VOLUME
Radio volume is shown as a percentage. Volume level is controlled by pressing the VOL Softkey, which
brings up the MUTE Softkey and the volume increase and decrease softkeys.
Adjusting the volume:
1) With the XM Radio Page displayed, press the
VOL
Softkey.
2) Press the
VOL –
Softkey to reduce volume or press the
VOL +
Softkey to increase volume. (Once the
VOL
Softkey is pressed, the volume can also be adjusted using the small FMS Knob.)
3) Press the
MUTE
Softkey to mute the audio. Press the
MUTE
Softkey again to un-mute the audio.
Figure 8-61 Volume Control