Garmin G1000 NXi, Руководство пилота

Страница: 258 / 538

Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
190-02177-02 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
238
FLIGHT MANAGEMENT
Activating a previously loaded approach with vectors to final:
1)
Press the PROC Key to display the ‘Procedures’ Window.
2) Highlight ‘Activate Vector-to-Final’ and press the ENT Key.
Loading and activating an approach using the MENU Key:
1) Press the
PROC
Key.
2)
Use the large FMS Knob to highlight ‘Select Approach’ and press the ENT Key.
3) From the ‘PROC – Approach Loading’ Page, press the MENU Key for the MFD. The ‘Page Menu’ Window is
displayed with ‘Load & Activate Approach’ highlighted.
4)
Press the ENT Key.
When selecting a NAVAID exclusive approach, the popup message is displayed: ‘NOT APPROVED FOR GPS –
GPS guidance is for monitoring only. Load approach?’ With ‘Yes’ highlighted, press the
ENT
Key.
Wh
en a visual approach is selected, the message ‘Obstacle clearance is not provided for visual approaches’ is
displayed. With ‘OK’ highlighted, press the
ENT
Key.
Removing an approach from the active flight plan:
1)
Press the FPL Key to display the ‘FPL – Active Flight Plan’ Page (MFD) or the ‘Flight Plan’ Window (PFD).
2) Press the MENU Key, and highlight ‘Remove Approach’.
3) Press the
ENT
Key. A confirmation window is displayed listing the approach procedure.
4) With ‘OK’ highlighted, press the
ENT
Key. To cancel the removal, press the
CLR
Key, push the
FMS
Knob, or
highlight ‘Cancel’ and press the ENT Key.
Or :
1) Press the
FPL
Key to display the ‘FPL – Active Flight Plan’ Page (MFD) or the ‘Flight Plan’ Window (PFD).
2) Push the FMS Knob to activate the cursor, and turn to highlight the approach header in the active flight plan.
3) Press the
CLR
Key. A confirmation window is displayed listing the approach procedure.
4) With ‘OK’ highlighted, press the
ENT
Key. To cancel the removal, press the
CLR
Key, push the
FMS
Knob, or
highlight ‘Cancel’ and press the ENT Key.
5) Push the
FMS
Knob to deactivate the flashing cursor.
Removing an approach from a stored flight plan:
1)
Press the FPL Key to display the ‘FPL – Active Flight Plan’ Page.
2) Turn the small FMS Knob clockwise one click to display the ‘FPL – Flight Plan Catalog’ Page.
3) Push the
FMS
Knob to activate the cursor and turn the
FMS
Knob to highlight the flight plan to be edited.