Garmin G1000 NXi, Руководство пилота

Страница: 197 / 538

190-02177-02 Rev. A
Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
177
FLIGHT MANAGEMENT
Displaying and removing airspace altitude labels:
1)
Press the MENU Key with the ‘Map – Navigation Map’ Page displayed. The cursor flashes on the ‘Map Settings’ option.
2) Press the ENT Key. The ‘Map Settings’ Window is displayed.
3) Turn the small
FMS
Knob to select the ‘Airspace’ Group, if necessary, and press the
ENT
Key.
4) Turn the large
FMS
Knob to select the ‘Airspace ALT LBL’ Field.
5) Turn the small FMS Knob to select ‘On’ to display labels and ‘Off’ to remove labels.
6) Push the
FMS
Knob to return to the ‘Map – Navigation Map’ Page.
NEAREST AIRSPACE
SETTING AIRSPACE ALERTS
The ‘Airspace Alerts’ Box (‘Aux – System Setup 1’ Page) on the MFD allows the pilot to turn the controlled/
special-use airspace message alerts on or off. This does not affect the alerts listed on the ‘NRST – Nearest
Airspaces ‘ Page or the airspace boundaries depicted on the ‘Map – Navigation Map’ Page. It simply turns
on/off the message provided in the ‘Alerts’ Window on the PFD when the aircraft is approaching or near an
airspace.
Pressing the PFD
Alerts
/
Message
Softkey displays the ‘Alerts’ Window on the PFD. The following airspace
alerts may be displayed in the ‘Alerts’ Window:
Message Comments
INSIDE ARSPC – Inside airspace. The aircraft is inside the airspace.
ARSPC AHEAD – Airspace ahead – less than
10 minutes.
Special use airspace is ahead of aircraft. The aircraft penetrates the airspace
within 10 minutes.
ARSPC NEAR
– Airspace near and ahead. Special use airspace is near and ahead of the aircraft position.
ARSPC NEAR
– Airspace near – less than 2
nm.
Special use airspace is within 2 nm of the aircraft position.
Table 5-7 PFD Airspace Alert Messages
An altitude buffer is also provided which “expands” the vertical range above or below an airspace. For
example, if the buffer is set at 500 feet, and the aircraft is more than 500 feet above/below an airspace, an
alert message is not generated, but if the aircraft is less than 500 feet above/below an airspace and projected
to enter it, the pilot is notified with an alert message. The default setting for the altitude buffer is 200 feet.
Turning an airspace alert on or off:
1) Use the FMS Knob to select the ‘Aux – System Setup 1’ Page ( Setup 1 Softkey).
2) Push the
FMS
Knob momentarily to activate the flashing cursor.
3) Turn the large
FMS
Knob to highlight the desired field in the ‘Airspace Alerts’ Box.
4)
Turn the small FMS Knob clockwise to turn the airspace alert On or counterclockwise to turn the alert Off.
5) Push the FMS Knob to remove the flashing cursor.