background image

Maintaining Your Speed

Before you can use the cruise control feature, you must calibrate the trolling motor (

Calibrating the Trolling 

Motor, page 5

).

The cruise control feature is an autopilot function that sets and maintains a specific speed over ground, 
adjusting for changes in current and wind automatically.
NOTE: You can enable the cruise control feature from the remote control only, but can control the speed and 
direction from both the remote control and foot pedal.
On the remote control, press 

.

Cruise control is enabled at the present speed.

Using the remote control or foot pedal, adjust the speed as needed.
Using the remote control or foot pedal, adjust the heading as needed.

TIP: You can use cruise control to set the speed while using the heading hold feature (

Maintaining Your 

Heading, page 14

) or following a route (

Navigating a Route, page 17

).

To disable cruise control and turn off the propeller, you must press 

.

Steering

Steering the Trolling Motor Manually

Manual mode is the default operational mode of the trolling motor. In manual mode, you can adjust the direction 
and speed of the trolling motor as needed.
NOTE: The trolling motor is in manual mode by default when you turn it on.
If necessary, on the remote control, select  .
Select an action:

• Using the remote control, press   and   to steer.

NOTE: You can also use gesture controls to steer the boat manually using the remote control (

Using 

Gesture Controls to Steer, page 16

).

• Using the foot pedal, push the pedal with your toes and heel to steer.

Maintaining Your Heading

Before you can use the heading hold feature, you must calibrate the trolling motor (

Calibrating the Trolling 

Motor, page 5

).

The heading hold feature is an autopilot function that sets and maintains the current heading of the boat. You 
can set the behavior of the heading hold feature when accounting for drift (

Changing the Heading Hold Behavior

page 15

).

Steer the boat in the direction you want to go.
On the remote control or foot pedal, select  .

NOTE: You can adjust the direction of the heading hold by pressing   and  , or by using gesture controls 
(

Using Gesture Controls to Adjust the Heading Hold, page 16

).

To disable heading hold and return to manual mode, you must select  , 

, or step on the foot pedal.

14

Operation

Содержание FORCE KRAKEN



































Отзывы: