background image

Connecting to a Chartplotter

Your compatible Garmin

®

 chartplotter must have the latest software version installed before you can connect 

the trolling motor.
You can connect the trolling motor wirelessly to a compatible Garmin chartplotter on your boat. After you 
connect to a compatible chartplotter, you can control the trolling motor from the chartplotter in addition to the 
remote control and foot pedal.
Turn on the chartplotter and the trolling motor.
Make sure that the chartplotter is hosting a wireless network.

NOTE: If you have multiple chartplotters installed, only one is the wireless network host. Consult your 
chartplotter's owner's manual for more information.

On the chartplotter, select Settings > Communications > Wireless Devices > Garmin Trolling Motor > Start.
On the trolling motor display panel, press   three times to enter pairing mode.

 on the trolling motor display panel illuminates blue as it searches for a connection to the chartplotter, and 

changes to green when the connection is successful.
A confirmation message appears on the chartplotter when the connection is successful.

After the chartplotter and trolling motor connect successfully, enable the trolling motor bar on the 

chartplotter to control the motor.
See the latest version of your chartplotter's owner's manual for complete operation instructions.

Remote Control

Installing Batteries

The remote control operates using two AA batteries (not included). Use lithium batteries for best results.
Turn the D-ring counter-clockwise, and pull up to remove the cover.
Insert two AA batteries, observing polarity.

Replace the battery cover, and turn the D-ring clockwise.

6

Remote Control

Содержание FORCE KRAKEN



































Отзывы: