Garmin FORCE KRAKEN, Руководство пользователя

Страница: 13 / 34

Remote Control Screen
Shows the operational status of the trolling motor.
For example, when in manual control, Manual is shown, and when the heading hold is on, Heading Hold
is shown, along with the heading-hold set point in degrees.
Shows the trolling motor battery status.
Green: the motor battery voltage is good.
Yellow: the motor battery voltage is low.
Red: the motor battery voltage is critically low.
TIP: You can change the appearance of the trolling motor battery status so that it shows a numeric
value instead of an icon (
Trolling Motor Settings, page 20 ).
You can view the remote control battery level by pressing .
Shows the status of the propeller.
When the propeller icon is shown, the propeller is active. When the propeller icon is not shown, the
propeller is off.
Shows the GPS signal strength of the trolling motor.
PROP
Shows the speed level of the propeller ( Adjusting the Speed of the Motor, page 13 ).
NOTE: When using the cruise control feature, this field is replaced with .
SOG Shows the measured speed over ground (SOG) in the specified units.
Navigating the Menu
You can use the menu and arrow keys to navigate the menu on the remote control.
• To open the menu, press
.
• To move between different menu items, press and .
• To select a menu item, press .
• To move back to a previous menu item, press .
• To exit the menu, press
, or press repeatedly until you reach the main screen.
Remote Control 9