Pausing and Resuming Navigation
1 While navigating, on the remote control, select an option:
• To pause navigation while continuing in the same direction at the same speed, select
> Standby.
• To pause navigation and set anchor lock, select
Navigation stops, and the trolling motor returns to manual mode or maintains your position in anchor lock.
2 Select
> Follow Route or press to resume navigation.
3 If necessary, start the propeller.
Stopping Navigation
Select
> Stop Nav.
Navigation stops, and the trolling motor returns to manual mode.
Settings
Trolling Motor Settings
On the remote control, select
> Settings > Trolling Motor.
Wi-Fi: Sets the wireless network preferences for the trolling motor (
Wireless Network Settings, page 21
).
Calibrate: Calibrates the trolling motor compass (
Calibrating the Trolling Motor, page 5
) and sets the trolling
motor bow offset (
Setting the Bow Offset, page 5
).
Units: Sets the units of measure.
Battery: Changes the appearance of the trolling motor battery indicator from an icon to a numeric value.
Prop Stow Side: Sets which side of the trolling motor the propeller rotates to when stowing the trolling motor.
This is helpful when you store other items near the stowed propeller. This may also be necessary if you install
a LiveScope
™
transducer on the trolling motor.
Auto Power On: Turns on the trolling motor when you apply power to the system.
Heading Hold: Sets the behavior of the heading hold feature (
Changing the Heading Hold Behavior, page 15
).
Nav. Arrival: Sets the behavior of the trolling motor when you reach the end of a route. With the Anchor Lock
setting, the trolling motor holds the position using the anchor lock feature when the boat reaches the end of
the route. With the Manual setting, the propeller turns off when the boat reaches the end of the route.
CAUTION
When using Manual for the Nav. Arrival setting, you must be ready to take control of the boat.
Anchor Gain: Sets the response of the trolling motor when in anchor lock mode. If you need the trolling motor
to be more responsive and move quicker, increase the value. If the motor is moving too much, decrease the
value.
Navigation Gain: Sets the response of the trolling motor when navigating. If you need the trolling motor to be
more responsive and move quicker, increase the value. If the motor is moving too much, decrease the value.
Clear User Data: Deletes all saved waypoints, routes, tracks, and you active track.
NOTE: If you are connected to a chartplotter, selecting this clears user data from both the trolling motor and
the connected chartplotter.
Restore Defaults: Resets the trolling motor settings to the factory default values.
20
Settings
Содержание FORCE KRAKEN
Страница 1: ...FORCE KRAKENTROLLINGMOTOR Owner sManual...
Страница 4: ......
Страница 33: ......
Страница 34: ...support garmin com GUID B3BCDA2E E3B8 4864 840E DA1DB2C5C670 v1 September 2023...