Garmin FORCE KRAKEN, Руководство пользователя

Страница: 16 / 34

Installing Batteries
The foot pedal can operate using two AA alkaline, NiMH, or lithium batteries (not included). Use lithium batteries
for best results.
1 Lift up the front of the foot pedal as far as possible.
2 Pinch the sides of the battery cover , and pull up to remove it.
3 Insert two AA batteries, observing polarity.
4 Place the battery cover over the batteries, and push down until both sides snap into place.
Pairing the Foot Pedal
1 Turn on the trolling motor.
2 On the trolling motor display panel, press three times to enter pairing mode.
on the trolling motor display panel illuminates blue as it searches for a connection.
3 Bring the foot pedal within 1 m (3 ft.) of the display panel on the trolling motor.
4 Connect the foot pedal to power using the power cable, or insert batteries to turn it on.
5 Within 30 seconds of turning on the foot pedal, hold until the status LED on the foot pedal illuminates
blue.
6 Release .
The status LED on the foot pedal illuminates blue as it searches for a connection, then turns off when it pairs
successfully with the trolling motor.
on the trolling motor display panel changes to green when the connection is successful.
Status Indicator
The LED on the foot pedal indicates the foot pedal status.
Illuminates green The foot pedal is powering on.
Illuminates and flashes
blue The foot pedal is pairing. The LED turns off when it connects to the trolling motor
or the pairing process times out without connecting.
Flashes green when
pushing a button The foot pedal is connected to the trolling motor and sending a command for the
button being pushed.
Flashes red when pushing
a button
The foot pedal is not connected to the trolling motor.
Off
The LED turns off when the pedal is connected to the trolling motor and not
sending commands. This prolongs battery life.
12 Foot Pedal