background image

Navigating a Saved Track

Select 

 > Tracks > Saved Tracks.

A list of the ten closest saved tracks is shown.

Select a saved track.
Select Navigate To.
Select an option:

• To navigate the saved track from the beginning of the track to the end, select Forward.
• To navigate the saved track from the end of the track back to the beginning, select Backward.

Turn on the propeller (

Turning the Propeller On and Off, page 13

).

The trolling motor drives along the saved track in the chosen direction (

Navigating, page 19

).

Viewing Saved Track Details

On the remote control, select 

 > Tracks > Saved Tracks.

A list of the ten closest saved tracks is shown.

Select a saved track.
Select Review.

Editing a Saved Track Name

On the remote control, select 

 > Tracks > Saved Tracks.

A list of the ten closest saved tracks is shown.

Select a saved track.
Select Edit.
Enter a new name for the saved track.

Deleting a Saved Track

On the remote control, select 

 > Tracks > Saved Tracks.

A list of the ten closest saved tracks is shown.

Select a saved track.
Select Delete.

Navigating

Before you can navigate, you must calibrate the trolling motor (

Calibrating the Trolling Motor, page 5

).

The trolling motor uses GPS to steer the boat to a waypoint location or to follow a route or a track.
On the remote control, select an option:

• Begin navigating to a saved waypoint (

Navigating to a Waypoint, page 16

).

• Begin navigating a saved route (

Navigating a Route, page 17

).

• Begin retracing the active track (

Navigating to the Start of the Active Track, page 18

).

• Begin navigating a saved track (

Navigating a Saved Track, page 19

).

NOTE: You can also use the trolling motor to follow autoguidance paths when navigation is started from a 
connected chartplotter. See your chartplotter owner's manual for more information.
Navigating is shown on the remote control screen, and the trolling motor automatically steers the boat to the 
destination.

Adjust the speed as needed.

Operation

19

Содержание FORCE KRAKEN



































Отзывы: