Garmin FORCE KRAKEN, Руководство пользователя

Страница: 21 / 34

Viewing Waypoint Details
1 On the remote control, select > Waypoints.
A list of the ten closest waypoints is shown.
2 Select a waypoint.
3 Select Review.
Editing a Waypoint Name
1 On the remote control, select > Waypoints.
A list of the ten closest waypoints is shown.
2 Select a waypoint.
3 Select Edit.
4 Enter a new name for the waypoint.
Deleting a Waypoint
1 On the remote control, select > Waypoints.
A list of the ten closest waypoints is shown.
2 Select a waypoint.
3 Select Delete.
Routes
A route is a sequence of locations that leads you to your final destination.
When you connect the trolling motor to a chartplotter, the routes stored on the chartplotter are synchronized
with the routes stored on the trolling motor. Deleting or editing routes on one device automatically changes the
routes stored on the other device. You can create routes on the chartplotter only.
You can save up to 100 routes.
Navigating a Route
1 On the remote control, select > Routes.
A list of the ten closest routes is shown.
2 Select a route.
3 Select Navigate To.
4 Select an option:
• To navigate the route from the starting point used when the route was created, select Forward.
• To navigate the route from the destination point used when the route was created, select Backward.
• To navigate from your current location to the beginning of the route, then navigate the route, select From
Start.
5 Turn on the propeller ( Turning the Propeller On and Off, page 13 ).
The trolling motor drives along the route in the chosen direction ( Navigating, page 19 ).
As you approach the end of the route, by default, the trolling motor switches to the anchor lock feature and
holds position at the end of the route. You can change this behavior in the settings (
Trolling Motor Settings,
page 20 ).
Viewing Route Details
1 On the remote control, select > Routes.
A list of the ten closest routes is shown.
2 Select a route.
3 Select Review.
Operation 17