Non-compliance with the specification might cause risk for life or health and can determine proper work of the blind.
We strongly recommend to comply with the specification.
Installation of the tubular motor should be performed by specialists with 1kV or higher SEP-certified electrician's licence (SEP - Association of Polish
Electrical Engineers) or equal license.
35EVY and 45EVY SERIES TUBULAR MOTOR
www.sukcesgroup.pl
Illustrations from the top:
1. Tubular motor 35 EVY with obstacle detection
2. Tubular motor 45 EVY with obstacle detection
EVY motors are motors with radio receiver. They have
a mechanism for detection of obstacles, so that the motor
stops if sensing resistance in its path. Detection of obstacles
works in both directions, with the use of security locks as well
as with springy hangers. Electronic limit position switches set
by using the remote control provide ease of programming.
Motors provide the ability to set the third position. For EVY
motors, it is possible to connect an impulse switch that
controls the motor in "step by step" mode. EVY series tubular
motors are compatible with all YOODA brand devices.
1. Radio receiver memory:
up to 20 transmitters
2. Max time of continous work:
4 min.
3. Power supply:
230 V / 50 Hz
4. Operating temperature:
from -5°C to 50°C
5. Protection degree:
IP 44
Maximal time of continuous work is 4 minutes. After that time thermal protection will be activated preventing motor form
overheating. After that motor will be disabled for about 20 minutes until it cools down.
1
1. General information
power supply cable
control system
programming
button
capacitor
motor
brake
gear
antenna
