Garmin CS 1522 Скачать руководство пользователя

Страница: 34 / 74

CHAPTER 2 GETTING STARTED

CHIRP Sonar

CHIRP (Compressed High-Intensity Radiated Pulse) is one of the most sophisticated

sonar technologies available for the fishing and boating public. Instead of sending just

one single frequency, CHIRP sonar sends a continuous sweep of frequencies ranging

from low to high. Garmin CHIRP sonar technology then interprets each frequency

individually upon its return.

This provides much more information, from which CHIRP sonar is able to construct a

much clearer, higher resolution image with greater target separation and crisper fish

arches. For example, 80–160 kHz sonar sweeps through the entire range from 80 kHz all

the way up to 160 kHz, hitting every single frequency in between.

2.3.2 Adjusting the Range

The range controls the depth displayed on the sonar display. When range is set to

Auto

(the recommended setting), the depths will automatically track the bottom. Allowing

the device to adjust the range automatically keeps the bottom within the lower or outer

third of the sonar screen, and can be useful for tracking a bottom that has minimal or

moderate terrain changes.

Range can also be manually set to a specific depth. Manually adjusting the range enables

you to view a specified range, which can be useful for tracking a bottom that has large

terrain changes, such as drop-offs or cliffs. For example, if searching for fish no deeper

than 50 feet, the

Range

can be set to

50 ft

. The sonar display will then only show returns

within 50 feet.

• Rotate the main knob to manually adjust the range.
• Press

[RANGE]

to switch between

Auto Range

and

Manual Range

• You can also adjust the range by pressing

[MENU]

Sonar Setup

Range

2.3.3 Adjusting the Zoom

The zoom controls the “field of vision” within the specified range.

• Press

[ZOOM]

and select an option.

• You can also select a zoom option by pressing

[MENU]

Sonar Setup

Zoom

While adjusting the zoom, a zoomed view appears on the left, with a zoom scope on the

right edge of the screen.

Содержание CS 1522











































































Результаты поиска

Содержание CS 1522

Отзывы:

Похожие инструкции для CS 1522

Бренды по названию

Популярные бренды

Garmin CS 1522, Руководство пользователя

Результаты поиска

Содержание CS 1522

Отзывы:

Похожие инструкции для CS 1522

Бренды по названию

Популярные бренды