Page 31 | HEEGM Service Manual part# 4532502 (Rev 0)
6 COMPONENTS
(CONT.)
6.11 ON-OFF Switch & Main Power Switch
WARNING
Before working on the switch, remove the unit from power supply.
i
IMPORTANT
The redundant terminals on the switch(es) protect the spade
connectors. When installing a new switch, put on new redundant
terminals or re-use the existing ones.
To remove or install a switch:
1.
WARNING: Remove the unit from power supply.
2. Remove the RIGHT Side Leg Panel (see section 6.3).
i
Ensure you pull out the panel slowly to avoid disconnecting any wiring accidentally.
3.
i
Note wire numbers and location before removing all wire connections from the switch, or
refer to the wiring diagram.
4. Remove the switch from the Leg Panel by squeezing the retaining clips and pushing the switch
out of the cutout from the inside out.
5. Snap a new switch into the cutout.
i
IMPORTANT
Ensure to INSTALL the new switch RIGHT SIDE UP as they can be
snapped onto the panel upside down.
6. Reassemble in reverse order.
7.
i
Ensure the connections between the male and female connectors are secured to the main
power line at the back (see “4.3 Major Components Illustrated”).
8.
i
To avoid pinching the wires, tuck the wires safely away before sliding back the Leg Panel.
Содержание HEEGM48CL
