Garland 741 RQG, Инструкция по эксплуатации

Страница: 42 / 172

English
42/172
In this position the wheel will not fall out of the axle
but it will be able to move freely.
Mounting fixed for working:
Place the wheel so that the hole of the pin is inside
the axle of the wheel (S).
Place the pin (Q) and place the security ring (R) over
the axis thus avoiding that the pin falls out of place. In
this position the wheel will be connected to the axle
and will not be able to turn freely.
6.2.3. MOUNTING THE PROTECTOR
Install the protector with the screws (V) provided as
per the figure.
6.3. FUEL AND OIL
IMPORTANT: The fuel used for this machine is
highly flammable. If the fuel or the machine
ignites, put out the fire with a dry powder
extinguisher.
Petrol and oil are extremely flammable and
explosive under certain conditions. Do not
smoke and keep flames, sparks or heat away
from the machine.
Use unleaded gasoline 95 octane.
Do not use fuel that has been stored for longer than
2 months. A fuel stored for too long will cause the
starting of the machine to be more difficult and result
in unsatisfactory engine performance. If the fuel
has been in the machine’s tank for longer than two
months, empty the tank and replace it with fuel in
perfect condition.
6.3.1. FILLING THE FUEL TANK
1. Choose a suitable area to perform this operation.
2. Remove the fuel tank cap and fill with fuel.
3. Tightly close the fuel tank’s cap and remove all the
fuel that spilled with a dry cloth.
WARNING:
Stop the engine before refueling.
S Q
R
S Q
R
V
V