Gardenline 702316 Скачать руководство пользователя страница 45

Страница: 45 / 56

2 X 20V Li-ion 5-in-1 Cordless Garden Kit

AFTER SALES SUPPORT

e-mail: [email protected]

1300 889 028

MODEL No.: CBC36A • 10/2020 • 702316

(toll free)

AFTER SALES SUPPORT

(toll free)

2 X 20V Li-ion 5-in-1 Cordless Garden Kit

e-mail: [email protected]

1300 889 028

MODEL No.: CBC36A • 10/2020 • 702316

Cleaning

WARNING. Water or other liquids that have entered the housing

can cause a short circuit. Do not immerse the product in water or

other liquids.

WARNING. Make sure that no water or other liquids get into the

housing.

WARNING. Do not use aggressive cleaning agents, brushes with

metal or nylon bristles, or sharp or metallic cleaning objects such

as knives, hard spatulas and the like. These can damage the surfaces.

WARNING. Clean the product thoroughly, especially the cutting

devices, after each use and let all parts dry. Otherwise, moist

plant residues can harden or start to become moldy and are then

difficult to remove.

1) Turn off the product. Wait until the device stops completely.
2) Remove the battery packs.
3) Remove all plant residues with a hand brush or a brush.
4) Clean all smooth surfaces with a damp cloth.
5) Clean the housing with a soft cloth or brush.

the new edger blade.
5) Place the edger blade cover (50) with the opening downwards over the

inner flange (e) on the spindle. (Fig. S3)
6) Insert the edger blade cover lock nut (51) on top of the edger blade cover

(50), onto the spindle and tighten it by turning it anti-clockwise with the

wrench (17mm) (not provided). (Fig. S1)

Содержание 702316

























































Результаты поиска

Содержание 702316

Отзывы:

Похожие инструкции для 702316

Бренды по названию

Популярные бренды

Gardenline 702316, Оригинальное руководство пользователя

Результаты поиска

Содержание 702316

Отзывы:

Похожие инструкции для 702316

Бренды по названию

Популярные бренды