Gardenline 702316 Скачать руководство пользователя страница 35

Страница: 35 / 56

2 X 20V Li-ion 5-in-1 Cordless Garden Kit

AFTER SALES SUPPORT

e-mail: [email protected]

1300 889 028

MODEL No.: CBC36A • 10/2020 • 702316

(toll free)

AFTER SALES SUPPORT

(toll free)

2 X 20V Li-ion 5-in-1 Cordless Garden Kit

e-mail: [email protected]

1300 889 028

MODEL No.: CBC36A • 10/2020 • 702316

Do not use the cutting unit above waist height.

WARNING. The higher the cutting device is off the ground, the

greater the risk of injury from cuttings being thrown sideways.

WARNING. Wear eye protection and heavy clothing, and use the

shoulder strap supplied

during opreration.

1) Hold the device with the right hand on the rear handle and left hand on

the P handle.
2) Make sure your footing is firm. Keep feet apart. Divide your weight evenly

on both feet.
3) Switch on the device as described in the chapter “Switching on and off”.

4) Never hold the work head higher than your hip. Work cautiously. The

higher you hold the device the bigger is the risk of thrown objects or

clippings.
5) Plunge the blade from above when cutting undergrowing trees.

6) Move the blade close to the ground to cut young trees or grass.

WARNING. Do not attempt to cut woody material with a larger

diameter, since the blade may catch or jerk the brush cutter

forward. This may cause damage to the blade or the brush cutter or loss

of control of the brush cutter, resulting in personal injury.

WARNING. Improper use of a blade may cause it to crack, chip, or

shatter. Thrown parts may seriously injure the operator or

bystander. To reduce the risk of personal injury, it is essential to take the

following precautions.

1) Avoid contacting with hard or solid foreign objects such as stones, rocks

or pieces of metal.
2) Never cut wood or shrubs with a stem diameter of more than 2cm.
3) Inspect the blade at a regular short interval for signs of damage. Do not

continue working with a damaged blade.

4) Re-sharpen the blade regularly (when it has dulled noticeably) and have it

balanced if necessary (performed by a qualified service technician).

Using the pole saw

WARNING. Before using the pole saw, check that the oil tank is

filled. This ensures the chain is lubricated which is done

Содержание 702316

























































Результаты поиска

Содержание 702316

Отзывы:

Похожие инструкции для 702316

Бренды по названию

Популярные бренды

Gardenline 702316, Оригинальное руководство пользователя

Результаты поиска

Содержание 702316

Отзывы:

Похожие инструкции для 702316

Бренды по названию

Популярные бренды