Gardenline 702316 Скачать руководство пользователя страница 36

Страница: 36 / 56

2 X 20V Li-ion 5-in-1 Cordless Garden Kit

AFTER SALES SUPPORT

e-mail: [email protected]

1300 889 028

MODEL No.: CBC36A • 10/2020 • 702316

(toll free)

AFTER SALES SUPPORT

(toll free)

2 X 20V Li-ion 5-in-1 Cordless Garden Kit

e-mail: [email protected]

1300 889 028

MODEL No.: CBC36A • 10/2020 • 702316

automatically. If necessary, fill the oil tank as described in the chapter

“Filling the oil tank”.

WARNING. Do not stand directly below a branch being cut. Keep

bystanders far away. Do not stand on a ladder or other type of

unstable support while using the device. Do not use the device near

cable, electrical power or telephone lines. Keep 3m (10 ft) away from all

power lines.

WARNING. Always wear a helmet when cutting above your head

height, otherwise you can injure yourself from falling clippings.

1) Use both hands to grip pole saw. Use firm grip. Thumbs and fingers must

wrap around pole saw handle and pole.
2) Make sure your footing is firm. Keep feet apart. Divide your weight evenly

on both feet.
3) Switch on the product as described in the chapter “Switching on and off”.

Make sure the pole saw is running at full speed before starting a cut.
4) When starting a cut, place the moving chain against the wood being cut.

Hold the pole saw firmly in place to avoid possible bouncing or skating

(sideways movement) of saw.
5) Guide the pole saw using light pressure. Do not force. The motor will

overload and can burn out. It will do the job better and safer at the rate for

which it was intended.
6) Remove the pole saw from a cut with the saw running at full speed. Stop

the pole saw by releasing the on/off trigger lever (6). Make sure the saw

chain (25) has stopped before setting the pole saw down.

Trimming a tree (pruning)

WARNING. Avoid kickback. Kickback can result in severe injury or

death. See kickback, to avoid risk of kickback.

WARNING. Do not operate pole saw while: 1) in a tree; 2) on a

ladder or any other unstable surface; 3) in any awkward position.

You may lose control of the pole saw causing severe injury.

WARNING. Do not extend arms above shoulders when using pole

saw.

Содержание 702316

























































Результаты поиска

Содержание 702316

Отзывы:

Похожие инструкции для 702316

Бренды по названию

Популярные бренды

Gardenline 702316, Оригинальное руководство пользователя

Результаты поиска

Содержание 702316

Отзывы:

Похожие инструкции для 702316

Бренды по названию

Популярные бренды