Gardenline 702316 Скачать руководство пользователя страница 40

Страница: 40 / 56

2 X 20V Li-ion 5-in-1 Cordless Garden Kit

AFTER SALES SUPPORT

e-mail: [email protected]

1300 889 028

MODEL No.: CBC36A • 10/2020 • 702316

(toll free)

AFTER SALES SUPPORT

(toll free)

2 X 20V Li-ion 5-in-1 Cordless Garden Kit

e-mail: [email protected]

1300 889 028

MODEL No.: CBC36A • 10/2020 • 702316

WARNING. Accidental starting of the

devices can lead to serious injuries. Remove

the battery packs after each use and before any

maintenance. Wear protective gloves.

WARNING. When servicing, use only

identical replacement parts. Use of any

other parts may create a hazard or cause product

damage. To ensure safety and reliability, all

repairs should be performed by a qualified service

technician.

Replacing the line

a. Replacing the spool and line complete

For your convenience it is recommended you buy

spool and line complete.
1) Press and hold in the two cap release latches. Turn

anti-clockwise and pull cap away from the spool holder. (Fig. O1)
2) Remove old spool. Then, place new spool into cutting head. Release one

line from cleat and feed line through eyelet. Repeat for second line. (Fig. O2)
3) Replace the cap, pressing firmly down towards the spool holder to ensure

cap is fully located. Check that the cap is correctly fitted by trying to remove

it without depressing the two latches.

b. Replacing the line only

WARNING. Your Trimmer is designed to use

only line with a maximum diameter of

2.0mm. Always wind the line onto the upper

section of the spool first.

1) Remove the cap of the spool as as described in

the chapter “To replace the spool and line complete”.

(Fig. O1)

Maintenance

Содержание 702316

























































Результаты поиска

Содержание 702316

Отзывы:

Похожие инструкции для 702316

Бренды по названию

Популярные бренды

Gardenline 702316, Оригинальное руководство пользователя

Результаты поиска

Содержание 702316

Отзывы:

Похожие инструкции для 702316

Бренды по названию

Популярные бренды