Gardena SILENO+ Series, Руководство оператора

Страница: 38 / 52

Message Cause Action
Next start hh:mm
The timer setting prevents the product
from operating.
Change the timer settings. Refer to
To
do the timer settings on page 22.
The rest period is in progress. The
product has an inbuilt standby period
according to the Standby time table.
This behavior is normal and no action
is required.
The time on the product is not correct. Set the time. Refer to
To set the time &
date on page 26.
The day’s mowing
is complete
The rest period is in progress. The
product has an inbuilt standby period
according to the Standby time table.
This behavior is normal and no action
is required.
Lifted
The lift sensor has been activated as
the product has become trapped.
Free the product
Collision sensor
problem, front/rear
The product body can not move freely
around its chassis.
Check that the product body can move
freely around its chassis.
If the problem remains, the message
requires action by authorized service
technician.
Wheel drive prob-
lem, right/left
Grass or other object is wrapped
around the drive wheel.
Clean the wheels and around the
wheels.
Alarm! Mower
switched off
The alarm was activated because the
product was switched OFF.
Adjust the security level in the
Security
menu, refer to To set the security level
on page 23.
Alarm! Mower
stopped
The alarm was activated because the
product was stopped.
Alarm! Mower lif-
ted
The alarm was activated because the
product was lifted.
Alarm! Mower til-
ted
The alarm was activated because the
product was tilted.
Electronic problem Temporary electronic or software rela-
ted issue.
Restart the product.
If the problem remains, the message
requires action by authorized service
technician.
Loop sensor prob-
lem, front/rear
Charging system
problem
Tilt sensor prob-
lem
Temporary prob-
lem
38 - Troubleshooting 1025 - 001 - 23.01.2019