Gardena SILENO+ Series, Руководство оператора

Страница: 24 / 52

3.10.4.1 To set the SensorControl
1. Do steps 1–3 in
To get access to the menu
on page 22.
2. Use the arrow buttons and the OK button to
move through the menu structure
SensorControl > Use SensorControl.
3. Push the OK button to select the
SensorControl.
4. Push the BACK button.
3.10.4.2 To set the SensorControl frequency
Set how frequently the product must cut the
grass when the SensorControl is in use. There
are 3 frequency levels: Low, Mid and High. The
higher the frequency, the longer the product is
allowed to work.
1. Do steps 1–3 in
To get access to the menu
on page 22.
2. Use the arrow buttons and the OK button to
move through the menu structure
SensorControl > Cutting time.
3. Use the arrow buttons to select
Low, Mid or
High frequency.
4. Push the BACK button.
3.10.5 Lawn Coverage
The Lawn Coverage function is used to guide the
product to remote parts of the work area.
You can divide your lawn into 3 areas.
3.10.5.1 To set the Lawn Coverage function
1. Do steps 1–3 in
To get access to the menu
on page 22.
2. Use the arrow buttons and the OK button to
move through the menu structure Installation
> Lawn Coverage > Area 1-3
3. Use the left arrow button to select the area.
4. Push the OK button.
5. Measure the distance from the charging
station to the start of the area. Measure
along the guide wire. Refer to To measure
the distance from the charging station on
page 24.
6. Push the number buttons to select the
distance, measured in m.
7. Use the number buttons to select the % of
the cutting time the product must cut the
area. The % is equal to the percentage of
the area in relation to the complete work
area.
a) Measure the area.
b) Divide the area with the work area.
c) Convert the result to %.
30%
20%
3.10.5.2 To do a test of the Lawn Coverage
function
1. Put the product in the charging station.
2. Do step 1-3 in
To get access to the menu on
page 22.
3. Use the arrow buttons and the OK button to
move through the menu structure
Installation
> Lawn Coverage > Area 1-3 > More > Test.
4. Push the OK button.
5. Push the START button.
6. Close the hatch.
7. Make sure the product can find the area.
3.10.5.3 To measure the distance from the
charging station
1. Put the product in the charging station.
2. Do steps 1–3 in
To get access to the menu
on page 22.
3. Use the arrow buttons and the OK button to
move through the menu structure
Installation
> Lawn Coverage > Area 1-3 > How far?
4. Use the number buttons to set 500 m as a
distance.
5. Push the BACK button.
24 - Installation 1025 - 001 - 23.01.2019