Gardena SILENO+ Series Скачать руководство пользователя страница 27

Страница: 27 / 52

4. The inclusion code is presented in the

product display.

Note: The product can only be shown as a device

in the smart system app if it first has been

included from the product.

3.10.10.3 Inclusion in the App
The inclusion of all GARDENA smart devices

takes place over the smart system app.
To download the GARDENA smart system app
1. Download the GARDENA smart system app

from App Store or Google Play.

2. Open the app and register as a user.
3. Log in and choose

Include device from the

start page in the app.

4. Follow the instructions in the app.

Note: The smart gateway needs internet

connection to be able to include the product to

the app.

3.10.10.4 Disabled menus
When the smart product is part of the smart

system, some menus in the product display are

disabled. You can still see all of the settings in

the product but some can only be changed with

the GARDENA smart system app. The following

settings are blocked in the menu selection of the

smart product:
•

Timer

•

Time & Date

•

Language

•

Country

3.10.10.5 Exclude device
To remove the wireless connection between the

product and smart system, select the

Exclude

device option in the product menu. If you confirm

to exclude the device, there will be no

communication between the product and other

smart system devices.

Note: The product must be manually deleted from

the list of products in the GARDENA smart

system app.

3.10.10.6 Status of the GARDENA smart system
Connected Yes/No

As soon as the product is connected to smart

system gateway, you can check the connection

status from this menu. The status is either

connected

Yes or not connected No.

Signal strength

The signal quality between the product and the

Gateway can be either

Good, Poor or Bad. The

product charging station should preferably be

placed in a location with

Signal strength - Good,

for best smart system performance.

1025 - 001 - 23.01.2019

Installation - 27

Содержание SILENO+ Series





















































Результаты поиска

Содержание SILENO+ Series

Отзывы:

Бренды по названию

Популярные бренды

Gardena SILENO+ Series, Руководство оператора

Результаты поиска

Содержание SILENO+ Series

Отзывы:

Бренды по названию

Популярные бренды