Gardena 14730 Скачать руководство пользователя страница 11

Страница: 11 / 138

Disconnect the product from the mains and disconnect the battery if the product

starts to vibrate abnormally. Check immediately. Excessive vibration can cause

injury.
Do not use the product nearby a water.
Do not operate next to swimming pools or garden ponds.
Protect the battery contacts from moisture.

Personal safety

DANGER! Risk of suffocation!

Small parts can be easily swallowed. There is also a risk that the poly-

bag can suffocate toddlers. Keep toddlers away when you assemble the

product.
Know how to stop the product quickly in an emergency.
Avoid contact to the oil of the blade in particular when you react allergic with it.
Only work in the daylight or when visibility is good.
Check your product before each use. Always visually inspect your Hedge

Trimmer before each use. Check that the ventilation slots are not obstructed in

any way.
If the product got hot while operation, let it cool down before storage.
Warning! When wearing hearing protection, and due to the noise produced by

the product, the operator may not notice persons approaching.
Always wear suitable clothing, protective gloves, and stout shoes.
Always ensure that you have a secure foothold whilst working.

2. ASSEMBLY

DANGER! Risk of injury!

Cut injury when the product starts accidentally.

Remove the battery and slide the protective cover over the

blade before you assemble the product.

To assemble the front handle [ Fig. A1 ]:
1. Loosen both screws

(2)

and remove them.

2. Push the front handle

(1)

into the slot in the hedge trimmer.

Make sure that the front handle

(1)

is completely in place and the

handle hole is inline up with the threaded hole.

3. Put both screws

(2)

in the threaded holes in the hedge trimmer.

Do not push the front start lever

(3)

while you doing this.

4. Tighten both screws

(2)

Make sure that the screws

(2)

are tightened and the start button

(3)

can be completely pushed.

3. OPERATION

DANGER! Risk of injury!

Cut injury when the product starts accidentally.

Wait for the blade to stop, remove the battery and slide the

protective cover over the blade before you adjust or transport

the product.

To charge the battery [ Fig. O1 / O2 / O3 ]:

CAUTION!

Note the mains voltage! The voltage of the power source must

match the voltage specified on the rating plate of the charger.

For the GARDENA Battery Hedge Trimmer Art. 14730-55 / 14731-55

there is no battery and no charger in the scope of delivery.
Thanks to the intelligent charging process, the charge condition of the

battery is automatically detected and then charged up with the optimal

charge current depending on battery temperature and voltage.
In this way, the battery is treated with care and remains permanently fully

charged when it is stored in the charger.
1. Push the locking button

(A)

and remove the battery

(B)

from the battery

holder

(D)

2. Connect the battery charger

(C)

into a mains socket.

3. Slide the battery charger

(C)

onto the battery

(B)

When the battery charge indicator

(Lc)

at the charger flashes green

the battery is being charged.
When the battery charge indicator

(Lc)

at the charger illuminates

permanently green the battery is completely charged

(Charging time see 7. TECHNICAL DATA).

4. Examine the charge status regularly while you charge.
5. When the battery

(B)

is completely charged, you can disconnect the

battery

(B)

from the charger

(C)

Meaning of the Indication Elements:
Indication on the charger [ Fig. O3 ]:

Flashing of the Battery

Charge Indicator

(Lc)

The charging procedure is indicated by

flashing

of the battery charge

indicator

(Lc)

Note:

The charging procedure is only possible when the battery

temperature is within the allowable charging temperature range,

see 7. TECHNICAL DATA.

Continuous Lighting

of the Battery

Charge Indicator

(Lc)

Continuous lighting

of the battery charge indicator

(Lc)

indicates that

the battery is fully charged

that the temperature of the battery is

not within the allowable charging temperature range and can therefore

not be charged.
When the battery is not inserted,

continuous lighting

of the battery

charge indicator

(Lc)

indicates that the mains plug is inserted in the

socket outlet and that the battery charger is ready for operation.

Battery charge status indication

(P)

on the product [ Fig. O4 / O8 ]:

After starting the product, the battery charge status indication

(P)

is displayed for 5 seconds.

Battery charge status

Battery charge status indication

67 – 100 % charged

(L1)

(L2)

and

(L3)

illuminate green

34 – 66 % charged

(L1)

and

(L2)

illuminate green

11 – 33 % charged

(L1)

illuminates green

0 – 10 % charged

(L1)

flashes green

If the LED

(L1)

flashes green, the battery must be charged.

If the error LED

(Wp)

is illuminated or flashing, see 6. TROUBLESHOOTING.

Work positions:
The hedge trimmer can be operated in 3 positions.
–   Side trimming [ Fig.  O5 ]
–   High trimming [ Fig.  O6 ]
–   Low trimming [ Fig.  O7 ]

To start the hedge trimmer [ Fig. O1 /O8 ]:

DANGER! Risk of injury!

Risk of injury if the product does not stop when you

release the start levers.

Do not bypass the safety devices or switches. For example do

not attach the start levers to the handle.

To start:
The product is provided with a two-handed safety device (2 start

levers) to prevent the product from being turned on by accident.
1. Put the battery

(B)

into the battery holder

(D)

until it audibly engages.