GARANT SG1, Руководство по эксплуатации

Страница: 39 / 239

www.hoff mann-group.com
37
DE
EN
FR
IT
ES
CZ
PL
RU
ZH
FR
IT
ES
CZ
PL
RU
ZH
DE
3.2 Operation and display field
3.2.1 Overview
START/STOP button
Start the shrink fitting process (start generator) and
end the shrink fitting process (stop the energy input).
MODE button
Switches between the various automatic modes and manual mode. When the LED in the
MODE is lit, the desired mode can be selected using the "+" and "–" buttons.
Boost button Additional time
Pressing this button extends the heating time in the automatic modes for the current
heating cycle by the percentage setting that is configured (see "Configure boost factor
(additional time)").
Cooling button
Switches the cooling on and off
(Applies only to the spray cooler option) .
+ button
Increase the diameter of the tool (only for automatic modes) /
Increase the power (only for manual mode) / select mode
– button
Reduce the diameter of the tool (only for automatic modes) /
Reduce the power (only for manual mode) / select mode