Ganz DIGIMASTER DR-16M55-RA-4TB, Руководство пользователя

Страница: 69 / 148

English
|
69
Event Setup
Define various events, and specify the conditions to notify the user in various ways.
\ \
Alarm Out
Specify the alarm output conditions with the work schedule.
Alarm Out
1. From < SYSTEM SETUP > - < EVENT >, select
< ALARM OUT >.
2. Use the [
▲▼
◀▶
/ ENTER ] buttons on the remote
control or use the mouse to select < ALARM OUT >
and configure the related settings.
i
NAME : You can rename the alarm.
i
OPERATION : Set the alarm output mode.
- N/O (Normal Open) : It normally stays Open.
However, if an event occurs, it will switch to Close.
-
N/C (Normal Close) : It normally stays Close.
However, if an event occurs, it will switch to Open.
i
DURATION : Specify the duration of the alarm
output.
-
TRANSPARENT : Keep the alarm out for as much time as the event lasts.
-
UNTIL KEY : Keep the alarm out until a mouse or remote control button is pressed.
-
5 ~ 300 SEC : Keep the alarm out for as long as specified.
i
TEST : Forcibly output the alarm for the test purpose.
3. To apply the change, click < APPLY > in the bottom of the screen.
4. When done, press the [ EXIT ] button on the remote control or click < CLOSE > in the lower screen. The confirmation
message appears and you will return to the previous menu.
System Setting