System Setting
60
|
System Setting
-
LOAD : Apply the settings of the storage device
to the DVR. Connect the storage device to the
USB port of DVR.
i
NETWORK SETUP WIZARD : Triggered when the
corresponding button is pressed or upon factory
initialization. The wizard guides through network
configuration such as setting the DHCP or static IP
address, WEB and RTSP service ports.
i
SYSTEM ID : Assign an ID to the DVR to distinguish
it out from others when there are multiple DVR used.
The default value is
“
SYSTEM ID
”
.
i
PASSWORD : Open or close the dialog box for
settings of the menus: quit, system settings, record
settings, backup, and search.
J
If it is set to <
Off
>, note that the ADMIN account is only
effective and access to all menus will be restricted.
i
EXPIRED TERM OF PASSWORD : You will be
prompted to change the current password after a
certain period of time.
i
AUTO LOGOUT : If there is no user input for a certain period of time, you can set to log out automatically.
i
WAIT TIME : Specify the waiting time for Auto Logout.
i
AC POWER FREQUENCY : Set to the actual AC power's frequency (50Hz / 60Hz) applied to DVR to avoid
flickering.
i
ENCODER MODE: This sets up whether the encoder mode is used or not.
3.
When done, press the [
EXIT
] button on the remote control or click <
CLOSE
> in the lower screen to return to the
previous menu.
