System Setting
58
|
System Setting
System Setting
You can configure the settings of date/time, system management, system information, control device, POS/ATM and Secuity.
\
\
Date/Time
Specify the current date and time.
1.
From <
SYSTEM SETUP
> - <
SYSTEM
>, select
<
DATE/TIME
>.
2.
Use the [
▲▼
◀▶
/
ENTER
] buttons on the remote
control or use the mouse to change the time or set
the options as necessary.
i
DATE/TIME : Set the current time and date.
Click< > to adjust the time manually.
i
DATE FORMAT : specify the date format.
i
TIME FORMAT : specify the time format.
i
TIME SERVER : obtain the current time from the
time server. Click < > to get the current time.
i
AUTO TIME SYNC : automatically synchronize the
time with the time server at a specific time.
i
SYNC CYCLE : Set up the cycle, which will be
synchronized with the time server.
i
SYNC AT : Set the time to sync with the time
server.
i
SCHEDULED SYNC TIME : This shows the predicted
time for sync, which was set up as described above.
i
TIMEZONE : specify the GMT standard time for
your local area.
i
DST : You can set up or release the DST (Daylight
Saving Time).
Both <
TIME SERVER
> and <
TIME SYNC
> will be enabled only if the DVR is connected to the Internet.
3.
To apply the change, click <
APPLY
> in the bottom of the screen.
4.
When done, press the [
EXIT
] button on the remote control or click <
CLOSE
> in the lower screen. The confirmation
message appears and you will return to the previous menu.
