Gantner GAT NET.Lock 7000, Установка, настройка и эксплуатация

Страница: 9 / 40

GAT NET.Lock 7000 System
General Information
www.gantner.com
HB_GAT-NETLOCK7000--EN_30
9
1. GAT NET.Lock 7000
Electronic RFID locker lock without connection cable and without bolt set.
2. GAT NET.Lock BoltSet 7100
Bolt set with door shackle and booster. Used for non-metallic doors. The bolt set is mounted on the inside of the
locker door.
3. GAT NET.Lock BoltSet 7200
Bolt set with door shackle and booster. Used for metallic doors. The bolt set is installed into locker door. The
label carrier is also included in this article.
4. GAT NET.Controller S 7000
The slave controller is a control unit to connect up to 24 GAT NET.Lock 7000. There are two different slave
controllers available, which differ in the type of RFID reader.
5. GAT NET.Controller M 7000
The master controller is a control unit to connect up to 8 slave controllers GAT NET.Controller S 7000. The master
controller is used to connect the slave controllers to a server / PC.
6. GAT NET.Power Supply 230V EU
Power supply unit for the slave and master controller (mains power plug is of type EU).
7. GAT NET.Power Plug
Plug to supply multiple controllers with a single power supply (see "4.3. Connections at the Slave Controller GAT
NET.Controller S 7000").
8. GAT NET.Lock Tool 7000
Center punch gauge for bolt mounting in the locker doors. With these gauges the drillings for the mounting can
be easily marked on the locker doors.
9. GAT NET.Lock Label 7000 GEA xxx
Different front labels in GANTNER design. The labels are available for right and left doors and with or without
printed locker numbers. On metallic doors the labels are sticked onto the label carrier. On non-metallic doors the
labels can be sticked directly onto the doors.
10. GAT NET.Lock Cable 4m
4-pin connection cable (4 metres) to connect a GAT NET.Lock 7000 to a slave controller. MOLEX plugs on both
sides.
11. GAT NET.Lock Connector
Connection socket to connect two GAT NET.Lock Cable 4m.
12. Ethernet Patch Cable
Standard network cable (min. CAT5) to connect the slave controller to the master controller.
13. GAT NET.Lock Basic Set xxx
Set consisting of five master cards and an assumption of liability sheet. The master cards have master key func-
tionality and can be used to open all lockers in an GAT NET.Lock 7000 locker system (e.g. used for service- and
cleaning personnel). Available for different RFID technologies ("B" for LEGIC
®
, "F" for MIFARE
TM
and "ISO" for
ISO 15693 systems).
2.2 Ordering Guide
For the planning and ordering of the GAT NET.Lock 7000 system components, an ordering guide is available in a
separate document ("DK_GAT-NETLOCK7000--Bestellhilfe-EN").