G&D DVI-Vision-CAT-AR, Инструкция по установке и эксплуатации

Страница: 105 / 140

Configuration
G&D DVI-Vision-CAT · 32
English
Changing the video mode of consoles
In the standard configuration of the KVM extender, the computer’s image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also define that the image of the other console is deactivated during con-
sole inputs.
The image of the other monitor is shown again as soon as the user has finished their
inputs at the console.
How to select the video mode of a console:
Related topics:

Changing the time span of the input lock on page 30
 Right for exclusive access to the console on page 30
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row Console setup and press Enter if you want to adjust the video
mode for the remote console (at the CON module).
Select the row Local console setup and press Enter if you want to adjust the
video mode for the local console (at the CPU module).
3. Under Video mode press F8 to select one of the following options:
always on  image is always on ( default )
switch off  switch off image for actions at the other console
4. Press F2 to save your settings.
Co
nf
ig
Pan
el
1. Click on KVM Extenders > [All Extenders] on the directory tree.
2. Double-click the computer module of the KVM extender to be configured.
3. Click on the tab Local if you want to adjust the video mode for the local
console (at the CPU module).
Click on the tab Remote > General if you want to adjust the video mode for
the remote console (at the CON module).
4. Under Image display select one of the following options:
 always on ( default )
 off for actions at remote/local console
5. Click OK to save your changes.