G&D DVI-Vision-CAT-AR, Инструкция по установке и эксплуатации

Страница: 126 / 140

Status LEDs
53 · G&D DVI-Vision-CAT
Status LEDs
The LEDs on both the front and the back panel of the computer module and the
user module let you control the operational status of the KVM extender at any time.
Meaning of the LEDs on the front panel
Area LED Status Meaning
Ident. Ident. on On as soon as the LED has been activated via web
application.
Power Red. on The optional power pack is connected and supplies
voltage of 12 Volt.
off The optional power pack is not (properly) con-
nected.
Main on The power pack is switched on and supplies the
required voltage.
off The power pack is switched off or a connection to
the power network could not be established.
Status Trans. on The connection to the remote station has been
established.
off The connection to the remote station could not be
established.
System on Device is ready for operation.
blinking Executing update.
fast
blinking Device is reset to default settings after pushing
the Reset button for a long time.
off Internal error
Console Video on A stable video signal has been detected at the
video input.
off The incoming video signal could not be detected
or its quality is not good enough to be processed.
K/M on The keyboard has been detected.
blinking No keyboard connected or keyboard could not be
detected.
Network yellow on The connection to the network has been success-
fully established.
off A connection could not be established.
green flickering Network activity.
off
No network activity