G&D DVI-Vision-CAT-AR, Инструкция по установке и эксплуатации

Страница: 108 / 140

Configuration
35 · G&D DVI-Vision-CAT
Selecting the USB-HID mode
The KVM extender supports various USB input devices. You can use the special fea-
tures of a particular USB input device after selecting the specific USB keyboard
mode.
As an alternative to the specific USB keyboard modes, you can also use the generic
HID mode. In this mode, data of the USB device connected to the top Keyb./Mouse
socket of the user module is transmitted to the computer module without being
altered.
Conf
ig
Pan
el
1. Click on KVM Extenders > [All Extenders] on the directory tree.
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs Remote > General .
The Freeze mode is adjusted separately for each video channel of the user module. The
following options can be adjusted separately for each video channel of multi-channel
devices.
4. Under Freeze mode select one of the following options (see above):
Disabled ( default )
Enabled
5. If the Freeze mode is active, additionally select one or both options available
under Freeze visualization :
Frame  shows a coloured frame when disconnected
OSD  shows Frozen and the time passed since disconnection
6. Click OK to save your changes.
IMPORTANT: The generic HID mode supports many available HID device. How-
ever, being able to operate particular HID device in generic HID mode can not be
guaranteed.
IMPORTANT: When connecting a USB hub or a USB composite device, which
contains multiple USB devices, only the first of the connected HID devices can be
used in generic HID mode.