G&D DVI-Vision-CAT-AR, Инструкция по установке и эксплуатации

Страница: 116 / 140

Configuration
43 · G&D DVI-Vision-CAT
Selecting a keyboard layout for inputs via OSD
If the on-screen display shows other characters than entered on the console key-
board, the keyboard layout has to be adjusted.
Make sure which keyboard layout the connected keyboard uses and configure it in
the settings of the user module.
How to change the keyboard layout of the keyboard of the user module:
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row Console setup and press Enter .
3. Under OSD key. layout press F8 to select one of the following options:
 German
 English (US)
 English (UK)
 French
 Spanish
 lat. American
 Portuguese
4. Press F2 to save your settings.
Config
Pa
n
el
1. Click on
KVM Extenders > [All Extenders]
on the directory tree.
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
Remote > General
.
4. Under
Keyboard layout
select one of the following options:

German

English (US)

English (UK)

French

Spanish

lat. American

Portuguese
5. Click
OK
to save your changes.