G&D DVI-Vision-CAT-AR, Инструкция по установке и эксплуатации

Страница: 79 / 140

Installation
G&D DVI-Vision-CAT · 6
English
Installing the computer module
The computer, whose signals are transmitted to the remote console, is connected to
the DVI-Vision-CAT-CPU computer module. If desired, connect a local console to the
computer module.
Establishing a connection to a local network
Network:
Insert a category 5 twisted pair cable (or better), which is available as acces-
sory. Connect the other end of the cable to the local network.
Connecting keyboard and mouse to the local computer
Mouse CPU:
Use the green plug of the twin PS/2 cable ( Twin-PS/2-M/M-2 ) to con-
nect the computer’s PS/2 mouse interface to this interface.
Keyb. CPU:
Use the green plug of the twin PS/2 cable ( Twin-PS/2-M/M-2 ) to connect
the computer’s PS/2 keyboard interface to this interface.
USB CPU:
Use the USB-AM/BM-2 cable to connect one of the computer’s USB inter-
faces to this interface.
NOTE: If desired, connect the network interface to a local network. This enables
you to access the
Config Panel
web application from this network and to send sys-
log messages to this network.
NOTE: Mouse and keyboard signals of both consoles can either be transmitted to
the computer using the USB interface USB CPU or using the PS/2 interfaces Mouse
CPU and Keyb. CPU PS/2.
Ident.
Main
Red.
Power
Service
Network
Video
K/M
Console
Trans.
System
Status
Main P
ower
RS232
DVI-D CPU DVI/VGA Out
USB 2.0 CPU
Keyb./Mouse In Out Line
Red. Power
Transmission
USB 2.0 Trans.
Keyb. CPU Mouse USB CPU