G&D DVI-Vision-CAT-AR, Инструкция по установке и эксплуатации

Страница: 103 / 140

Configuration
G&D DVI-Vision-CAT · 30
English
Changing the time span of the input lock
When carrying out keyboard or mouse inputs at a console, the KVM extender auto-
matically locks the input devices of the concurrent console. The lock is lifted if no
input is made at the active console within the adjusted timing of the input lock
(default: 1 second).
After the lock has been lifted, both users can operate the computer again.
The time span of the input lock can be adjusted between 1 and 90 seconds.
How to change the timespan of the input lock:
Related topic:

Operating the KVM extender exclusively on page 17
Right for exclusive access to the console
If no inputs are made at the active console during the adjusted time span of the auto-
matic input lock (default: 1 second), the default settings of the KVM extender permit
the other console to operate the extender.
If the function right for exclusive console access is activated in the web application,
you are able to operate the KVM extender exclusively by pressing the hotkey Hot-
key+Print (default: Ctrl+Print ).
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row System setup and press Enter .
3. Select the row Hotkey and press Enter .
4. Under Multiuser input lock enter the desired timespan of the input lock (1 to 90
seconds).
5. Press F2 to save your settings.
Confi
g
Pan
el
1. Click on KVM Extenders > [All Extenders] on the directory tree.
2. Double-click the computer module of the KVM extender to be configured.
3. Click the General tab.
4. Under Multiuser input lock enter the desired timespan of the input lock (1 to 90
seconds).
5. Click OK to save your changes.