Gamewell Smart Start IDENTIFLEX 630, Руководство по установке и эксплуатации

Страница: 207 / 226

IF 600 Firmware Version R7 Manual Supplement Issue 1 06/16/2000
91
CONFIGURATION DATA DESCRIPTIONS
File Variable
R:7 C:Smart Start Config
R: Revision number of configuration file
C: User configuration name or description (“Smart Start Config” is default) 20 char. Max.
System Variables
P: xxxxxx
P = Alarm prefix - up to 6 characters (“Fire” is default)
A:1 T:0 N:
A = Node number (network firmware Only)
T = Node type (network firmware Only)
0 = Individual type network (default @ SmartStart)
1 = Monolith type network (Not currently available)
N = Node name - up to 20 characters (network firmware Only)
I:256 O:256
I :Total number of input groups
O :Total number of output groups
S:0
S : System type
0=F 650
1=F 630
2=F 632
3=F 610
4=not used
B:00 L:18 A:0 S:0 P:1 C:3 M:0 I:16
B: Total number of bypassed inputs & outputs in system
L: Address of last valid card in system
A: Remote Annunciator exists (1) or not (0)
S: Silence Inhibit delay (0=0 see, 1=30sec, 2=1 min. 3=1min 30 see, 4=2min,
5=2min-30sec, 6=3 min. 7=3min-30sec, 8=4min, 9=4min-30sec, 10=5min)
P: Coded Signal pulse period (0= 5sec, 1=1sec, 2=1.5sec, 3=2sec)
C: Number of Coded Signal Cycles (0=1, 1=2, 2=3, 3=4, 4=5, 5=6, 6=7,7=8)
M: Signal type after coded signals have been completed (0=Silence, 1 =March Time)
I: Auto Silence time (0=2min, 1=2min 30sec, 2=3min, up to 26=15min {default = 10min}.